Provide PDF Format
AASHTO M 111M/M 111-14
- Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products (ASTM Designation: A 123/A 123M-12)
- standard by American Association of State and Highway Transportation Officials, 2014
- Publisher: AASHTO
$21.00$42.00
This specification covers the requirements for zinc coating (galvanizing) by the hot-dip process on iron and steel products made from rolled, pressed and forged shapes, castings, plates, bars, and strips.
This specification covers both unfabricated products and fabricated products, for example, assembled steel products, structural steel fabrications, large tubes already bent or welded before galvanizing, and wire work fabricated from uncoated steel wire. This specification also covers steel forgings and iron castings incorporated into pieces fabricated before galvanizing or which are too large to be centrifuged (or otherwise handled to remove excess galvanizing bath metal).
< br>Note: This specification covers those products previously addressed in M 111-80, ASTM A 123-78, and ASTM A 386-78
This specification covers both unfabricated products and fabricated products, for example, assembled steel products, structural steel fabrications, large tubes already bent or welded before galvanizing, and wire work fabricated from uncoated steel wire. This specification also covers steel forgings and iron castings incorporated into pieces fabricated before galvanizing or which are too large to be centrifuged (or otherwise handled to remove excess galvanizing bath metal).
< br>Note: This specification covers those products previously addressed in M 111-80, ASTM A 123-78, and ASTM A 386-78
Related Products
AASHTO T 322-07 (R2016)
Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) U..
$34.00 $68.00
AASHTO T 296-10 (R2016)
Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Tria..
$30.00 $60.00