Provide PDF Format
AASHTO M 196-16
- Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains (ASTM B745/B745M-95)
- standard by American Association of State and Highway Transportation Officials, 2016
- Publisher: AASHTO
$21.00$42.00
This specification covers corrugated aluminum pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes.
This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and sheet thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of sheet thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the sheet thickness. The structural design of corrugated aluminum pipe and the proper installation procedures are given in AASHTO's Standard Specifications for Highway Bridges.
This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and sheet thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of sheet thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the sheet thickness. The structural design of corrugated aluminum pipe and the proper installation procedures are given in AASHTO's Standard Specifications for Highway Bridges.
Related Products
AASHTO M 155-87 (2004)
Standard Specification for Granular Material to Control Pumping under Concrete Pavement..
$6.00 $12.00
AASHTO R 74-16
Standard Practice for Wet Preparation of Disturbed Soil Samples for Test..
$26.00 $52.00
AASHTO TP 83-10
Standard Method of Test for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (No..
$22.00 $44.00
AASHTO T 289-91 (2013)
Standard Method of Test for Determining pH of Soil for Use in Corrosion Testing..
$26.00 $52.00