Provide PDF Format
AASHTO M 86M/M 86-09 (R2013)
- Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (ASTM Designation: C 14M-07 and C 14-07)
- standard by American Association of State and Highway Transportation Officials, 2009
- Publisher: AASHTO
$19.00$37.00
This specification covers nonreinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts.
Note: This specification is a manufacturing and purchasing specification only and does not include requirements for bedding, backfill, or the relationship between field load conditions and the strength classification of pipe. However, experience has shown that the successful performance of this product depends upon the proper selection of the class of pipe, type of bedding and backfill, and care that the installation conforms to the construction specifications. Owners are cautioned that they must correlate the field requirements with the class of pipe specified and provide for or require inspection at the construction site.
This specification agrees with ASTM C 14M-07 and C 14-07 except that absorption testing is limited to the 5-h boil method, the use of fibers in Section 6.5 is at the owner's option, and the manufacturer is not afforded the option to supply inch-pound pipe when the order is placed in SI units.
Note: This specification is a manufacturing and purchasing specification only and does not include requirements for bedding, backfill, or the relationship between field load conditions and the strength classification of pipe. However, experience has shown that the successful performance of this product depends upon the proper selection of the class of pipe, type of bedding and backfill, and care that the installation conforms to the construction specifications. Owners are cautioned that they must correlate the field requirements with the class of pipe specified and provide for or require inspection at the construction site.
This specification agrees with ASTM C 14M-07 and C 14-07 except that absorption testing is limited to the 5-h boil method, the use of fibers in Section 6.5 is at the owner's option, and the manufacturer is not afforded the option to supply inch-pound pipe when the order is placed in SI units.
Related Products
AASHTO T 298-99 (2010)
Standard Method of Test for High-Strain Dynamic Testing of Piles..
$34.00 $68.00
AASHTO M 240-09
Standard Specification for Blended Hydraulic Cement (ASTM Designation: C 595-08)..
$25.00 $50.00
AASHTO M 279-14
Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric (ASTM Designation: A 116-1..
$21.00 $42.00
AASHTO T 178-15
Standard Method of Test for Cement Content of Hardened Portland Cement Concrete (ASTM Designation: C..
$21.00 $42.00