Provide PDF Format
AASHTO T 207-12 (R2016)
- Standard Method of Test for Thin-Walled Tube Sampling of Soils (ASTM D 1587-08)
- standard by American Association of State and Highway Transportation Officials, 2012
- Publisher: AASHTO
$19.00$37.00
This method covers a procedure for using a thin-walled metal tube to recover relatively undisturbed soil samples suitable for laboratory tests of engineering properties, such as strength, compressibility, permeability and density. Thin-walled tubes used in piston, plug, or rotary-type samplers, such as the Denison or Pitcher, must comply with the portions of this practice, which describe the thin-walled tubes.
Note - This method does not apply to liners used within the above samplers.
Not all tubes specified in this method may be of a sufficient diameter to perform all strength or consolidation testing. Refer to the appropriate test method for the minimum sample size to determine if the tube will be appropriate for that test.
Except for the use of SI units, this method is technically equivalent to ASTM D 1587-08.
Note - This method does not apply to liners used within the above samplers.
Not all tubes specified in this method may be of a sufficient diameter to perform all strength or consolidation testing. Refer to the appropriate test method for the minimum sample size to determine if the tube will be appropriate for that test.
Except for the use of SI units, this method is technically equivalent to ASTM D 1587-08.
Related Products
AASHTO TP 91-11 (2013)
Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Asphalt Bond St..
$30.00 $60.00
AASHTO HAZ-1
Fundamental Capabilities of Effective All-Hazards Infrastructure Protection, Resilience, and Emergen..
$13.00 $26.00
