Provide PDF Format
AASHTO T 355-15
- Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
- standard by American Association of State and Highway Transportation Officials, 2015
- Publisher: AASHTO
$34.00$68.00
This test method describes the procedure for determining the in-place density of asphalt mixtures by use of nuclear gauge. The density of the material is determined by the backscatter/air-gap ratio method.
Density - The total density of asphalt mixtures is determined by the attenuation of gamma radiation where the source and detector(s) remain on the surface (backscatter method).
The density in mass per unit volume of the material under test is determined by comparing the detected rate of gamma radiation with previously established calibration data.
Density - The total density of asphalt mixtures is determined by the attenuation of gamma radiation where the source and detector(s) remain on the surface (backscatter method).
The density in mass per unit volume of the material under test is determined by comparing the detected rate of gamma radiation with previously established calibration data.
Related Products
AASHTO T 276-10
Standard Method of Test for Developing Early-Age Compression Test Values and Projecting Later-Age St..
$21.00 $42.00
AASHTO T 152-12
Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method (ASTM C 231..
$32.00 $63.00
AASHTO LRFDCONS-2-I4
AASHTO LRFD Bridge Construction Specifications, 2009 Interim Revisions..
$27.00 $54.00