Provide PDF Format
FCI 91-2-2001
- Standard for Solenoid Valve Seat Leakage
- standard by Fluid Controls Institute, 01/01/2001
- Publisher: FCI
$50.00$100.00
Selection of a leakage class is not restricted as to valve design but valves of various commercially available designs and types of sealing materials are suggested.
This standard cannot be used as a basis for predicting seat leakage at conditions other than those specified.
This standard does not apply to valves normally used on high and ultra high vacuum (10-3 Torr or higher).
This standard is not intended to precludeany test method and/or fluid so long as results can be related to Table 1 of this standard.
This standard cannot be used as a basis for predicting seat leakage at conditions other than those specified.
This standard does not apply to valves normally used on high and ultra high vacuum (10-3 Torr or higher).
This standard is not intended to precludeany test method and/or fluid so long as results can be related to Table 1 of this standard.
Related Products
FCI 78-1-1998 (R2003)
Pressure Rating Standards for Pipeline Strainers Other Than "Y" Type..
$50.00 $100.00
