Provide PDF Format
TAPPI T 455 sp-09
- Identification of Wire Side of Paper
- standard by Technical Association of the Pulp and Paper Industry, 01/01/2009
- Publisher: TAPPI
$31.00$61.00
1. Scope
1.1 This method describes procedures for identifying the wire side of paper made on a fourdrinier papermachine with a single wire or forming fabric. The term "wire side" will be used throughout this method and relatesto the side of the sheet made in contact to either the machine wire or forming fabric.
1.2 It is not always possible to identify the difference between sides, particularly with coated and othersurface-treated papers, corrugating medium, papers made with certain multiply forming fabrics, certain high-gradepapers made from well-beaten rag stock, and specialties made with some variation from usual papermakingpractices. Nevertheless, if any one of the following procedures gives a clear result, identification is established.
1.3 These procedures are not applicable to paper made on cylinder, twin-wire, or other special machines.
1.1 This method describes procedures for identifying the wire side of paper made on a fourdrinier papermachine with a single wire or forming fabric. The term "wire side" will be used throughout this method and relatesto the side of the sheet made in contact to either the machine wire or forming fabric.
1.2 It is not always possible to identify the difference between sides, particularly with coated and othersurface-treated papers, corrugating medium, papers made with certain multiply forming fabrics, certain high-gradepapers made from well-beaten rag stock, and specialties made with some variation from usual papermakingpractices. Nevertheless, if any one of the following procedures gives a clear result, identification is established.
1.3 These procedures are not applicable to paper made on cylinder, twin-wire, or other special machines.
Related Products
TAPPI T811 om-11
Edgewise Compressive Strength of Corrugated Fiberboard (Short Column Test)..
$25.00 $49.00
